Microchip Mplab Snap Pg164100 In-Circuit Debugger

Microchip Mplab Snap Pic dsPIC Avr Sam Cortex Arm Icsp Programlayıcı

Hata Ayıklayıcı USB Type-C Jtag Swd Pdi Tpi Pg164100

Destek listesi: https://packs.download.microchip.com/DeviceDoc/Device_Support.pdf

     The MPLAB Snap In-Circuit Debugger (PG164100) allows affordable, fast and easy debugging and programming using the powerful graphical user interface of MPLAB® X IDE (Integrated Development Environment) or MPLAB IPE (Integrated Programming Environment). Supported device include:

•  PIC and AVR microcontrollers (MCUs)
•  dsPIC digital signal controllers (DSCs)
•  SAM (Arm Cortex-based) MCUs and microprocessors (MPUs)
•  CEC (Arm Cortex®-based) MCUs,

     The MPLAB Snap connects to the computer using a high-speed USB 2.0 interface and connects to the target via a Microchip debug 8-pin Single In-Line (SIL) connector. The SIL connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming (ICSP). MPLAB Snap has all the speed and entry-level features you need to quickly debug your prototype.

     The MPLAB Snap programs quickly. It features, a powerful 32-bit 300 MHz SAM E70 Arm Cortex®-M7 based MCU for quicker debug iterations. Along with its support for a wide target voltage, the MPLAB Snap supports interfaces such as 4-wire JTAG and Serial Wire Debug. It is also backward compatible for demo boards and target systems using 2-wire JTAG and In-Circuit Serial Programming™. The debugger system executes code like an actual device because it uses the target device’s built-in emulation circuitry, instead of a special debugger chip. All available features of a given device are accessible interactively and can be set and modified by theMPLAB X IDE interface.

     The MPLAB Snap In-Circuit Debugger / Programmer allows affordable, fast and easy debugging and programming of PIC, dsPIC, AVR and SAM flash MCUs and MPUs, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE) version 5.05 or later. The MPLAB Snap can be connected to a computer using a High-Speed USB 2.0 interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming (ICSP). It has all the speed and features entry-level users need to quickly debug their prototype.

     The MPLAB Snap programs fast, with a powerful 32-bit 300MHz SAME70 MCU for quicker debug iterations. Along with a wide target voltage, the MPLAB Snap supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming data gateway, while being backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP.

     Note: The Snap is compatible with MPLAB X IDE version 5.05 and later, and may not support all legacy devices. Please consult the Device Support file in the Documentation section of the MPLAB X IDE webpage. 

Microchip Mplab Snap Pg164100 In-Circuit Debugger

•     Matches silicon clocking speed
•         Programs as fast as the device will allow
•     Target voltage of 1.20V to 5.5V
•         Wide target voltage supports a variety of devices
•     Portable USB-powered
•         Powered by a high-speed USB 2.0, no external power required
•     CE and RoHS-compliant
•     8-pin single in-line header
•         Supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming data gateway
•     Compatibility
•         Backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP
•     Ease of maintenance and feature upgrade
•         Add new device support and features by installing the latest version of MPLAB X IDE, which is available as a free download at https://www.microchip.com/en-us/tools-resources/develop/mplab-x-ide
• The MPLAB Snap is compatible with any of these platforms: Microsoft Windows OS,  Linux OS,  macOS

Features/Capabilities:

•  Connects to computer via high-speed USB 2.0 (480 Mbits/s) cable (not included).
•  Powered through USB cable. Cannot power target; target must be powered from its own power supply (not included).
•  An 8-pin SIL programming connector and the option to use various interfaces.
•  Programs devices using MPLAB X IDE or MPLAB IPE.
•  Works with many Microchip PIC, dsPIC, AVR, or DSC devices, including 32-bit microcontrollers such as SAM, CEC and PIC32 devices. For details see the MPLAB X IDE Device Support List.
•  Supports 4-wire JTAG, Serial Wire Debug, UPDI, PDI, SPI programming, debugWIRE and TPI programming.
•  Backward compatibility for demo boards and target systems using 2-wire JTAG and ICSP (In-Circuit Serial Programming).
•  Supports multiple hardware and software breakpoints, stopwatch and source code file debugging.
•  Debugs your application on your own hardware in real time.
•  Sets breakpoints based on internal events.
•  Debugs at full target MCU speed.
•  Configures pin drivers.
•  Adds new device support and features by installing the latest version of MPLAB X IDE (available as a free download at http://www.microchip.com/mplabx/).
•  Indicates debugger status via the Active and Status LEDs.

Performance/Speed:

•  No firmware download delays incurred when switching devices
•  32-bit microcontroller using an Arm® Cortex®-M7 core running at 300 MHz

Safety:

•  RoHS, CE and China E compliant
•  Supports target supply voltages from 1.2V to 5.0V +/-10%

Paket içeriği:

• 1 Adet Microchip Mplab Snap Programlayıcı